Breitling · Galactic

Breitling Galactic Chronograph II Stainless Steel / MOP Ref. A1336410/A569/131S

The Breitling Galactic reference A1336410/A569/131S was produced 2011–2012 and is powered by the Breitling caliber Caliber 13 in a 44 mm stainless steel case water-resistant to 300 metres.

Breitling · Galactic

A1336410/A569/131S

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

ReferenceA1336410/A569/131S
CaliberCaliber 13
Production2011–2012
StatusDiscontinued 2012
Case materialStainless Steel
Case diameter44 mm
BezelCompass
CrystalSapphire
Water resistance300 m
DialWhite

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 44 mm this is a large watch that needs a bigger wrist. A sports watch that wears true to its size.

What it does

A chronograph - a stopwatch built into the watch. The top pushers start, stop and reset it, and small sub-dials count the minutes and hours timed, while the main hands keep normal time.

Owning it

Servicing: service about every 5 years; a service costs approximately $1.1K–$1.3K (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Straps: 22 mm lug width: the steel bracelet, leather, rubber and NATO straps in 22 mm fit. Confirm your exact reference before ordering, as lug width varies by generation.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/breitling-galactic-a1336410-a569-131s/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Breitling Galactic Chronograph II Stainless Steel / MOP A1336410/A569/131S card by WatchProfiles"></iframe>

Frequently asked questions

When was the Breitling reference A1336410/A569/131S produced?

The Breitling Galactic Chronograph II Stainless Steel / MOP (reference A1336410/A569/131S) was produced 2011–2012, according to the reference source listed at the foot of this page.

Which movement powers the Breitling A1336410/A569/131S?

It is powered by the Breitling caliber Caliber 13.

What size is the Breitling A1336410/A569/131S?

The case measures 44 mm in diameter and is made of stainless steel.

How water-resistant is the Breitling A1336410/A569/131S?

It is water-resistant to 300 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

Is the Breitling A1336410/A569/131S still in production?

Discontinued 2012. It was discontinued in 2012.

How often does the Breitling A1336410/A569/131S need servicing, and what does it cost?

Service about every 5 years; approximately $1.1K–$1.3K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source