Omega · Seamaster 300
Omega Seamaster 300 Master Co-Axial Stainless Steel / Sedna Gold / Black / Bracelet Ref. 233.20.41.21.01.001 (aka: 23320412101001)
The Omega Seamaster 300 reference 233.20.41.21.01.001 (aka: 23320412101001) was produced 2014–2021 and is powered by the Omega caliber 8400 water-resistant to 300 metres.
Omega · Seamaster 300
233.20.41.21.01.001 (aka: 23320412101001)
No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.
Specifications
| Reference | 233.20.41.21.01.001 (aka: 23320412101001) |
|---|---|
| Caliber | 8400 |
| Production | 2014–2021 |
| Status | Discontinued 2021 |
| Case diameter | 41 mm |
| Bezel | Rotating, 0-60 (Dive) |
| Crystal | Sapphire |
| Water resistance | 300 m |
| Dial | Black |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Is this watch right for you?
At 41 mm this is a modern mid-size case that suits medium wrists; a dive watch, worn every day, in or out of the water.
History of the model
Launched in 1957 as one of Omega's professional trilogy alongside the Speedmaster and Railmaster, the Seamaster 300 was Omega's first professional dive watch. The modern Seamaster 300 revives it with a no-date dial and Master Chronometer calibre 8912.
What it does
An automatic watch that tells the time; it winds itself as you wear it, using Omega's Co-Axial escapement.
Owning it
Servicing: service about every 5 years; a service costs approximately $650–$800 (approx., 2026).
Water resistance in practice: Built for serious diving, including saturation diving depths.
Straps: Steel bracelet standard; 21 mm lug width also takes leather, rubber or NATO straps.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
How to spot a fake
Check these before buying: (1) under a loupe, genuine Omega dial printing is sharp and even — fakes blur, thicken letters and drift off the baseline; (2) the applied Omega logo and indices should be raised metal, not flat print; (3) the helium escape valve at 10 o'clock, where fitted, should be a real screw-down part, not a glued-on dummy; (4) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (5) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.
Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.
Where to find one
- Visit the official Omega page for this watch
- Search Chrono24 for this reference
- Search WatchBox for this reference
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches
Omega Seamaster 300 Master Co-Axial Titanium / Sedna Gold / Blue / Bracelet
Ref. 233.60.41.21.03.001 (aka: 23360412103001)
Omega Seamaster 300 Master Chronometer Stainless Steel / Black / Bracelet
Ref. 234.30.41.21.01.001 (aka: 23430412101001)

Omega Speedmaster Broad Arrow
Ref. CK2915-1

Omega Speedmaster Broad Arrow
Ref. CK2915-2
Omega Speedmaster Professional Mark II Racing
Ref. ST 145.014 Racing
Omega Speedmaster Professional Mark II Plated
Ref. MD 145.034
Frequently asked questions
When was the Omega reference 233.20.41.21.01.001 (aka: 23320412101001) produced?
The Omega Seamaster 300 Master Co-Axial Stainless Steel / Sedna Gold / Black / Bracelet (reference 233.20.41.21.01.001 (aka: 23320412101001)) was produced 2014–2021, according to the reference source listed at the foot of this page.
Which movement powers the Omega 233.20.41.21.01.001 (aka: 23320412101001)?
It is powered by the Omega caliber 8400.
What size is the Omega 233.20.41.21.01.001 (aka: 23320412101001)?
The case measures 41 mm in diameter.
How water-resistant is the Omega 233.20.41.21.01.001 (aka: 23320412101001)?
It is water-resistant to 300 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.
Is the Omega 233.20.41.21.01.001 (aka: 23320412101001) still in production?
Discontinued 2021. It was discontinued in 2021.
How often does the Omega 233.20.41.21.01.001 (aka: 23320412101001) need servicing, and what does it cost?
Service about every 5 years; approximately $650–$800 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/omega/seamaster-300/233-20-41-21-01-001 — Produced: 2014 - 2021 · Movement: Omega caliber 8400 · Diameter: 41.00 mm · Water resistance: 300.00 m · Dial: Black
- https://thewatches.ca/blog/omega-watch-series-guide — Fit guidance (2026 value-add)
- https://www.watchscanning.com/journal/anatomy-of-a-fake-omega-seamaster/ — Authenticity guidance (2026 value-add)
- https://www.watchscanning.com/guides/omega-service-cost/ — Servicing guidance (2026 value-add) — Seamaster dive models. Omega recommends a complete service every 5-8 years. Price is Omega's official complete-service range for this movement type in 2026; an official service carries a 2-year warranty.
- https://www.omegawatches.com/en-ca/chronicle/1957-three-legends-are-born — Model history (2026 value-add)
- https://www.watchgecko.com/collections/watch-straps-omega — Strap options (2026 value-add)
- https://thewatches.ca/blog/omega-watch-series-guide — Complications (2026 value-add)
- https://www.omegawatches.com/en-us/watches/seamaster/heritage-models/catalog?watch_functions=1941 — Official brand page (2026 value-add)