Omega · Seamaster

Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Non-America's Cup Ref. 2230.50.00 (aka: 22305000)

The Omega Seamaster reference 2230.50.00 (aka: 22305000) dates from 2001 and is powered by the Omega caliber 1120 water-resistant to 300 metres.

Omega · Seamaster

2230.50.00 (aka: 22305000)

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference2230.50.00 (aka: 22305000)
Caliber1120
Productionfrom 2001
Case diameter41 mm
BezelRotating, 0-60 (Dive)
CrystalSapphire
Water resistance300 m
DialBlack

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 41 mm this is a modern mid-size case that suits medium wrists; a dive watch, worn every day, in or out of the water.

History of the model

The Seamaster began in 1948 as a water-resistant everyday watch; the Seamaster 300 of 1957 made it a true dive watch, and the Diver 300M launched in 1993. The current Diver 300M was redesigned in 2018 with a ceramic dial, laser-engraved waves and the Master Chronometer calibre 8800.

Famous wearers

What it does

An automatic watch that tells the time; it winds itself as you wear it.

Owning it

Servicing: service about every 5 years; a service costs approximately $650–$800 (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Straps: Steel bracelet standard; 20 mm lug width also takes rubber, leather or NATO straps (a flat strap leaves a small gap at the fitted bracelet lugs).

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) on post-2018 Diver 300M models, the wave dial is laser-engraved into ceramic — the waves have real depth and ripple evenly as you tilt the watch; fakes print or stamp them flat; (2) the helium escape valve at 10 o'clock should be a small conical, screw-down part, flush with the case — fakes fit an oversized, crooked or glued-on dummy; (3) the applied Omega logo and indices should be raised metal, not flat print; (4) the ceramic bezel should turn with firm, precise clicks, never loose or gritty; (5) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (6) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-seamaster-diver-300m-2230-50-00-aka-22305000/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Non-America's Cup 2230.50.00 (aka: 22305000) card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 2230.50.00 (aka: 22305000) produced?

The Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Non-America's Cup (reference 2230.50.00 (aka: 22305000)) was produced from 2001, according to the reference source listed at the foot of this page.

Which movement powers the Omega 2230.50.00 (aka: 22305000)?

It is powered by the Omega caliber 1120.

What size is the Omega 2230.50.00 (aka: 22305000)?

The case measures 41 mm in diameter.

How water-resistant is the Omega 2230.50.00 (aka: 22305000)?

It is water-resistant to 300 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

How often does the Omega 2230.50.00 (aka: 22305000) need servicing, and what does it cost?

Service about every 5 years; approximately $650–$800 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source