Omega · Seamaster

Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Leather Ref. 2830.50.91

The Omega Seamaster reference 2830.50.91 dates from 2001 and is powered by the Omega caliber 1120 water-resistant to 300 metres.

Omega · Seamaster

2830.50.91

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference2830.50.91
Caliber1120
Productionfrom 2001
Case diameter41 mm
BezelRotating, 0-60 (Dive)
CrystalSapphire
Water resistance300 m
DialBlack

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 41 mm this is a modern mid-size case that suits medium wrists; a dive watch, worn every day, in or out of the water.

History of the model

The Seamaster began in 1948 as a water-resistant everyday watch; the Seamaster 300 of 1957 made it a true dive watch, and the Diver 300M launched in 1993. The current Diver 300M was redesigned in 2018 with a ceramic dial, laser-engraved waves and the Master Chronometer calibre 8800.

Famous wearers

What it does

An automatic watch that tells the time; it winds itself as you wear it.

Owning it

Servicing: service about every 5 years; a service costs approximately $650–$800 (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Straps: Steel bracelet standard; 20 mm lug width also takes rubber, leather or NATO straps (a flat strap leaves a small gap at the fitted bracelet lugs).

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) on post-2018 Diver 300M models, the wave dial is laser-engraved into ceramic — the waves have real depth and ripple evenly as you tilt the watch; fakes print or stamp them flat; (2) the helium escape valve at 10 o'clock should be a small conical, screw-down part, flush with the case — fakes fit an oversized, crooked or glued-on dummy; (3) the applied Omega logo and indices should be raised metal, not flat print; (4) the ceramic bezel should turn with firm, precise clicks, never loose or gritty; (5) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (6) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-seamaster-diver-300m-2830-50-91/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Leather 2830.50.91 card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 2830.50.91 produced?

The Omega Seamaster Diver 300M Automatic 41 Stainless Steel / White Gold / Black / Leather (reference 2830.50.91) was produced from 2001, according to the reference source listed at the foot of this page.

Which movement powers the Omega 2830.50.91?

It is powered by the Omega caliber 1120.

What size is the Omega 2830.50.91?

The case measures 41 mm in diameter.

How water-resistant is the Omega 2830.50.91?

It is water-resistant to 300 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

How often does the Omega 2830.50.91 need servicing, and what does it cost?

Service about every 5 years; approximately $650–$800 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source