Omega · Seamaster

Omega Seamaster Diver 300M Automatic 41 White Gold / Skeleton / Bracelet / 50th Anniversary Ref. 2934.80.00

The Omega Seamaster reference 2934.80.00 was produced 1998–1999 and is powered by the Omega caliber 2400 in a 41 mm white gold case water-resistant to 300 metres.

Omega · Seamaster

2934.80.00

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference2934.80.00
Caliber2400
Production1998–1999
StatusDiscontinued 1999
Case materialWhite Gold
Case diameter41 mm
BezelRotating, 0-60 (Dive)
CrystalSapphire
Water resistance300 m
DialSkeleton

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 41 mm this is a modern mid-size case that suits medium wrists; a dive watch, worn every day, in or out of the water.

History of the model

The Seamaster began in 1948 as a water-resistant everyday watch; the Seamaster 300 of 1957 made it a true dive watch, and the Diver 300M launched in 1993. The current Diver 300M was redesigned in 2018 with a ceramic dial, laser-engraved waves and the Master Chronometer calibre 8800.

Famous wearers

What it does

A quartz watch: battery-powered, it tells the time and needs a battery change every few years rather than winding.

Owning it

Servicing: service about every 5 years; a service costs approximately $350–$450 (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Straps: Steel bracelet standard; 20 mm lug width also takes rubber, leather or NATO straps (a flat strap leaves a small gap at the fitted bracelet lugs).

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) on post-2018 Diver 300M models, the wave dial is laser-engraved into ceramic — the waves have real depth and ripple evenly as you tilt the watch; fakes print or stamp them flat; (2) the helium escape valve at 10 o'clock should be a small conical, screw-down part, flush with the case — fakes fit an oversized, crooked or glued-on dummy; (3) the applied Omega logo and indices should be raised metal, not flat print; (4) the ceramic bezel should turn with firm, precise clicks, never loose or gritty; (5) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (6) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-seamaster-diver-300m-2934-80-00/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Diver 300M Automatic 41 White Gold / Skeleton / Bracelet / 50th Anniversary 2934.80.00 card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 2934.80.00 produced?

The Omega Seamaster Diver 300M Automatic 41 White Gold / Skeleton / Bracelet / 50th Anniversary (reference 2934.80.00) was produced 1998–1999, according to the reference source listed at the foot of this page.

Which movement powers the Omega 2934.80.00?

It is powered by the Omega caliber 2400.

What size is the Omega 2934.80.00?

The case measures 41 mm in diameter and is made of white gold.

How water-resistant is the Omega 2934.80.00?

It is water-resistant to 300 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

Is the Omega 2934.80.00 still in production?

Discontinued 1999. It was discontinued in 1999.

How often does the Omega 2934.80.00 need servicing, and what does it cost?

Service about every 5 years; approximately $350–$450 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source