Omega · Seamaster Planet Ocean

Omega Seamaster Planet Ocean 600M Co-Axial 45.5 Master Chronometer Chronograph Stainless Steel / Orange / Rubber Ref. 215.32.46.51.01.001 (aka: 21532465101001)

The Omega Seamaster Planet Ocean reference 215.32.46.51.01.001 (aka: 21532465101001) dates from 2016 and is powered by the Omega caliber 9900 in a 45.5 mm stainless steel case water-resistant to 600 metres.

Omega · Seamaster Planet Ocean

215.32.46.51.01.001 (aka: 21532465101001)

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference215.32.46.51.01.001 (aka: 21532465101001)
Caliber9900
Productionfrom 2016
Case materialStainless Steel
Case diameter45.5 mm
BezelRotating, 0-60 (Dive)
CrystalSapphire
Water resistance600 m
DialBlack

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 45.5 mm this is a large, bold case that suits larger wrists; a dive watch, worn every day, in or out of the water.

History of the model

Launched in 2005 as Omega's serious professional diver, the Planet Ocean offers 600 m water resistance, a helium escape valve and bold styling, taking its design cues from the 1957 Seamaster 300.

Famous wearers

What it does

An automatic chronograph: the centre seconds hand and the subdials time events, and it winds itself as you wear it.

Owning it

Servicing: service about every 5 years; a service costs approximately $700–$850 (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) under a loupe, genuine Omega dial printing is sharp and even — fakes blur, thicken letters and drift off the baseline; (2) the applied Omega logo and indices should be raised metal, not flat print; (3) the helium escape valve at 10 o'clock, where fitted, should be a real screw-down part, not a glued-on dummy; (4) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (5) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-seamaster-planet-ocean-215-32-46-51-01-001-aka-21532465101001/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Planet Ocean 600M Co-Axial 45.5 Master Chronometer Chronograph Stainless Steel / Orange / Rubber 215.32.46.51.01.001 (aka: 21532465101001) card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 215.32.46.51.01.001 (aka: 21532465101001) produced?

The Omega Seamaster Planet Ocean 600M Co-Axial 45.5 Master Chronometer Chronograph Stainless Steel / Orange / Rubber (reference 215.32.46.51.01.001 (aka: 21532465101001)) was produced from 2016, according to the reference source listed at the foot of this page.

Which movement powers the Omega 215.32.46.51.01.001 (aka: 21532465101001)?

It is powered by the Omega caliber 9900.

What size is the Omega 215.32.46.51.01.001 (aka: 21532465101001)?

The case measures 45.5 mm in diameter and is made of stainless steel.

How water-resistant is the Omega 215.32.46.51.01.001 (aka: 21532465101001)?

It is water-resistant to 600 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

How often does the Omega 215.32.46.51.01.001 (aka: 21532465101001) need servicing, and what does it cost?

Service about every 5 years; approximately $700–$850 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source