Patek Philippe · Nautilus
Patek Philippe Nautilus 7018 'Silvery White' Stainless Steel / White Ref. 7018/1A
The Patek Philippe Nautilus reference 7018/1A dates from 2017 and is powered by the Patek Philippe caliber 324 S C in a 33.6 mm stainless steel case water-resistant to 60 metres.
Patek Philippe · Nautilus
7018/1A
No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.
Specifications
| Reference | 7018/1A |
|---|---|
| Caliber | 324 S C |
| Production | from 2017 |
| Case material | Stainless Steel |
| Case diameter | 33.6 mm |
| Bezel | Gem-Set |
| Crystal | Sapphire |
| Water resistance | 60 m |
| Dial | White |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Is this watch right for you?
33.6 mm case. A luxury sports watch: the slim integrated-bracelet case sits flat and wears smaller than its size suggests. Smart-casual or formal.
History of the model
Launched in 1976, designed by Gérald Genta: a steel sports watch with a rounded-octagonal bezel inspired by a ship's porthole and an integrated bracelet. The first reference was the 3700/1A 'Jumbo'. The modern steel icon, the 5711, ran from 2006 until Patek discontinued it in 2021; its successor, the white-gold 5811, arrived in 2022.
What it does
A time-only watch: it shows the hours and minutes, nothing more. It is an automatic watch: it winds itself from the motion of your wrist.
Owning it
Servicing: service about every 5 years; a service costs approximately $3.5K–$8K (approx., 2026).
Water resistance in practice: Suitable for showering and brief immersion; not for swimming.
Straps: Integrated steel or gold bracelet that flows from the case; it takes no standard strap — the bracelet is part of the watch.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
How to spot a fake
Look through the sapphire caseback first: a genuine Nautilus shows a hand-finished movement — sweeping Côtes de Genève striping, perlage, mirror-polished bevels and a solid 21K (5711) or 22K (5712) gold rotor engraved with the Calatrava cross and the Patek Philippe Seal. Fakes hide an ETA or clone movement with a plated rotor and flat, stamped stripes. Check the thickness: the steel 5711 is only 8.3 mm thick, and most fakes measure 9.5–11 mm because their clone movements are taller. Study the dial: the horizontal embossing is razor-sharp, perfectly even in pitch and depth, and darkens toward the rim; fakes space the lines unevenly or lose the gradient. Check the case finishing: brushed and polished surfaces meet at razor-sharp boundaries on a genuine watch; fakes blur the boundary or round the edges. Ask for an Extract from the Archives: Patek will confirm the reference, case and movement numbers and the year it left the factory — a mismatch is decisive. For any purchase at this value, have the watch authenticated by Patek or a qualified watchmaker before paying.
Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.
Where to find one
- Visit the official Patek Philippe page for this watch
- Search Chrono24 for this reference
- Search WatchBox for this reference
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches

Patek Philippe Nautilus 3700
Ref. 3700/1A
Patek Philippe Nautilus Power Reserve 3710
Ref. 3710/1A

Patek Philippe Nautilus 5711 Stainless Steel / Blue V1
Ref. 5711/1A
Patek Philippe Nautilus 5712 Stainless Steel / Blue
Ref. 5712/1A
Patek Philippe Nautilus 5980 Blue
Ref. 5980/1A
Patek Philippe Nautilus 5711 Yellow Gold / Silver
Ref. 5711J
From the Nautilus family
The verified photographs below show other references in the Patek Philippe Nautilus family — pictured: reference 3700/1A, reference 5711/1A, reference 5980R, reference 5711/1A, reference 5740/1G, reference 3700/1A. This profile's own reference, 7018/1A, is shown in specification form above.

Photo: Patek Philippe SA via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: Patek Philippe SA via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: Patek Philippe SA via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: Patek Philippe SA via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.
Other configurations of reference 7018/1A
Frequently asked questions
When was the Patek Philippe reference 7018/1A produced?
The Patek Philippe Nautilus 7018 'Silvery White' Stainless Steel / White (reference 7018/1A) was produced from 2017, according to the reference source listed at the foot of this page.
Which movement powers the Patek Philippe 7018/1A?
It is powered by the Patek Philippe caliber 324 S C.
What size is the Patek Philippe 7018/1A?
The case measures 33.6 mm in diameter and is made of stainless steel.
How water-resistant is the Patek Philippe 7018/1A?
It is water-resistant to 60 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for showering and brief immersion; not for swimming.
How often does the Patek Philippe 7018/1A need servicing, and what does it cost?
Service about every 5 years; approximately $3.5K–$8K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/patek-philippe/nautilus/7018-1a-001 — Produced: 2017 · Movement: Patek Philippe caliber 324 S C · Case material: Stainless Steel · Diameter: 33.60 mm · Water resistance: 60.00 m · Dial: White
- https://bonhams.shorthandstories.com/collecting-101-patek-philippe/ — Fit guidance (2026 value-add)
- https://www.watchscanning.com/authenticate/patek-philippe-nautilus/ — Authenticity guidance (2026 value-add)
- https://www.ecijewelers.com/blogs/recent-posts/patek-philippe-service-cost — Servicing guidance (2026 value-add) — Nautilus / Aquanaut / Cubitus steel: $3,500–$8,000; full service every 5–7 years.
- https://bonhams.shorthandstories.com/collecting-101-patek-philippe/ — Model history (2026 value-add)
- https://bonhams.shorthandstories.com/collecting-101-patek-philippe/ — Strap options (2026 value-add)
- https://watchbase.com/patek-philippe/nautilus/7018-1a-001 — Complications (2026 value-add)
- https://www.patek.com/en/collection/nautilus — Official brand page (2026 value-add)