Patek Philippe · Nautilus

Patek Philippe Nautilus 7118 Stainless Steel / Grey Ref. 7118/1A

The Patek Philippe Nautilus reference 7118/1A dates from 2017 and is powered by the Patek Philippe caliber 324 S C in a 35.2 mm stainless steel case water-resistant to 60 metres.

Patek Philippe · Nautilus

7118/1A

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference7118/1A
Caliber324 S C
Productionfrom 2017
Case materialStainless Steel
Case diameter35.2 mm
CrystalSapphire
Water resistance60 m
DialGrey

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

35.2 mm case. A luxury sports watch: the slim integrated-bracelet case sits flat and wears smaller than its size suggests. Smart-casual or formal.

History of the model

Launched in 1976, designed by Gérald Genta: a steel sports watch with a rounded-octagonal bezel inspired by a ship's porthole and an integrated bracelet. The first reference was the 3700/1A 'Jumbo'. The modern steel icon, the 5711, ran from 2006 until Patek discontinued it in 2021; its successor, the white-gold 5811, arrived in 2022.

What it does

A time-only watch: it shows the hours and minutes, nothing more. It is an automatic watch: it winds itself from the motion of your wrist.

Owning it

Servicing: service about every 5 years; a service costs approximately $3.5K–$8K (approx., 2026).

Water resistance in practice: Suitable for showering and brief immersion; not for swimming.

Straps: Integrated steel or gold bracelet that flows from the case; it takes no standard strap — the bracelet is part of the watch.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Look through the sapphire caseback first: a genuine Nautilus shows a hand-finished movement — sweeping Côtes de Genève striping, perlage, mirror-polished bevels and a solid 21K (5711) or 22K (5712) gold rotor engraved with the Calatrava cross and the Patek Philippe Seal. Fakes hide an ETA or clone movement with a plated rotor and flat, stamped stripes. Check the thickness: the steel 5711 is only 8.3 mm thick, and most fakes measure 9.5–11 mm because their clone movements are taller. Study the dial: the horizontal embossing is razor-sharp, perfectly even in pitch and depth, and darkens toward the rim; fakes space the lines unevenly or lose the gradient. Check the case finishing: brushed and polished surfaces meet at razor-sharp boundaries on a genuine watch; fakes blur the boundary or round the edges. Ask for an Extract from the Archives: Patek will confirm the reference, case and movement numbers and the year it left the factory — a mismatch is decisive. For any purchase at this value, have the watch authenticated by Patek or a qualified watchmaker before paying.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Other configurations of reference 7118/1A

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/patek-philippe-nautilus-7118-1a-011/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Patek Philippe Nautilus 7118 Stainless Steel / Grey 7118/1A card by WatchProfiles"></iframe>

Frequently asked questions

When was the Patek Philippe reference 7118/1A produced?

The Patek Philippe Nautilus 7118 Stainless Steel / Grey (reference 7118/1A) was produced from 2017, according to the reference source listed at the foot of this page.

Which movement powers the Patek Philippe 7118/1A?

It is powered by the Patek Philippe caliber 324 S C.

What size is the Patek Philippe 7118/1A?

The case measures 35.2 mm in diameter and is made of stainless steel.

How water-resistant is the Patek Philippe 7118/1A?

It is water-resistant to 60 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for showering and brief immersion; not for swimming.

How often does the Patek Philippe 7118/1A need servicing, and what does it cost?

Service about every 5 years; approximately $3.5K–$8K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source