Rolex · Milgauss
Rolex Milgauss Black Ref. 1019
The Rolex Milgauss reference 1019 was produced 1960–1988 and is powered by the Rolex caliber 1580 in a 38.5 mm stainless steel case water-resistant to 100 metres.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.
Specifications
| Reference | 1019 |
|---|---|
| Caliber | 1580 |
| Production | 1960–1988 |
| Status | Discontinued 1988 |
| Case material | Stainless Steel |
| Case diameter | 38.5 mm |
| Crystal | Sapphire |
| Water resistance | 100 m |
| Dial | Black · Matte |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Price guidance
| Pre-owned | Approximately $10K–$12K (approx., 2026) |
|---|
Prices are approximate guides for 2026 and vary by condition, box and papers, and seller. The exact price is with the seller — this library publishes no live prices.
Is this watch right for you?
38.5 mm case suits medium to large wrists; a sporty everyday watch — worn casual or smart-casual.
History of the model
Launched in 1956 for scientists at CERN, built to resist magnetic fields up to 1,000 gauss, with a lightning-bolt seconds hand. The green sapphire crystal (GV) arrived in 2007; production ended in 2023.
What it does
Time only, built to resist magnetic fields up to 1,000 gauss. No date, no chronograph.
Owning it
Servicing: service about every 10 years; a service costs approximately $1.65K–$2.5K (approx., 2026).
Water resistance in practice: Suitable for swimming and snorkelling; not for scuba diving.
Straps: 20 mm lug width. The standard bracelet is an Oyster or Jubilee; the same 20 mm lugs also take fitted rubber straps or a NATO strap for casual wear.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
How to spot a fake
Check the seconds hand first: a modern Rolex glides at 8 beats a second, it never ticks once a second. The date Cyclops must magnify 2.5x so the numeral fills the lens. On modern models the rehaut (inner ring) is engraved 'ROLEX ROLEX ROLEX' with the serial at 6 o'clock, and a tiny coronet is laser-etched in the crystal at 6 o'clock, visible only at an angle. Dial printing should be crisp and slightly raised, the crown should wind smooth and firm, and the watch should feel heavy with a solid, quiet bracelet. The caseback is plain solid metal on most Rolexes. If any check fails, or the price looks too good, have the watch inspected in person by a trusted expert. On a Milgauss: check the lightning-bolt seconds hand, and on GV models the green sapphire crystal, which has a distinct green tint at the edge.
Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.
Where to find one
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches

Rolex Milgauss White
Ref. 116400
Rolex Milgauss Black
Ref. 116400

Rolex Milgauss GV Stainless Steel / Black
Ref. 116400GV-0001 (aka: M116400GV-0001)

Rolex Milgauss GV Stainless Steel / Z-Blue
Ref. 116400GV-0002 (aka: M116400GV-0002)
Rolex Cosmograph Daytona
Ref. 6239
Rolex Cosmograph Daytona
Ref. 6240
Frequently asked questions
When was the Rolex reference 1019 produced?
The Rolex Milgauss Black (reference 1019) was produced 1960–1988, according to the reference source listed at the foot of this page.
Which movement powers the Rolex 1019?
It is powered by the Rolex caliber 1580.
What size is the Rolex 1019?
The case measures 38.5 mm in diameter and is made of stainless steel.
How water-resistant is the Rolex 1019?
It is water-resistant to 100 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for swimming and snorkelling; not for scuba diving.
How much does the Rolex 1019 cost?
As an approximate 2026 guide: pre-owned Approximately $10K–$12K (approx., 2026). Prices vary by condition, box and papers, and seller — these are guides, not live prices.
Is the Rolex 1019 still in production?
Discontinued 1988. It was discontinued in 1988.
How often does the Rolex 1019 need servicing, and what does it cost?
Service about every 10 years; approximately $1.65K–$2.5K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/rolex/milgauss/1019-001 — Produced: 1960 - 1988 · Movement: Rolex caliber 1580 · Case material: Stainless Steel · Diameter: 38.50 mm · Water resistance: 100.00 m · Dial: Black
- https://www.swisswatchexpo.com/watches/mens/rolex/ — Pre-owned price guidance (2026 value-add) — Milgauss pre-owned band; discontinued 2023, no current retail.
- https://helvetus.com/blogs/watch-straps/how-to-measure-watch-lug-width — Fit guidance (2026 value-add)
- https://www.bobswatches.com/rolex-blog/editorial/how-to-spot-a-fake-rolex.html — Authenticity guidance (2026 value-add)
- https://watchranker.com/how-much-does-rolex-servicing-cost-and-how-often-is-it-needed-guide/ — Servicing guidance (2026 value-add)
- https://millenarywatches.com/rolex-models-introduction-years/ — Model history (2026 value-add)
- https://helvetus.com/blogs/watch-straps/how-to-measure-watch-lug-width — Strap options (2026 value-add)
- https://watchbase.com/rolex — Complications (2026 value-add)