Rolex · Sea-Dweller

Rolex Sea-Dweller 16660 Matte Mark 1 Ref. 16660 Matte MK1

The Rolex Sea-Dweller reference 16660 Matte MK1 was produced 1980–1988 and is powered by the Rolex caliber 3035 in a 40 mm stainless steel case water-resistant to 1220 metres.

Rolex · Sea-Dweller

16660 Matte MK1

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference16660 Matte MK1
Caliber3035
Production1980–1988
StatusDiscontinued 1988
Case materialStainless Steel
Case diameter40 mm
BezelRotating, 0-60 (Dive)
CrystalSapphire
Water resistance1220 m
DialBlack · Matte

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Price guidance

Pre-ownedApproximately $10K–$16K (approx., 2026)

Prices are approximate guides for 2026 and vary by condition, box and papers, and seller. The exact price is with the seller — this library publishes no live prices.

Is this watch right for you?

40 mm case suits medium to large wrists; a heavy professional dive watch — a tool watch, worn casual.

History of the model

Launched in 1967 for professional saturation divers, with a helium escape valve and a deeper rating than the Submariner. The current 43 mm Sea-Dweller is rated to 1,220 metres; the Deepsea goes to 3,900 metres.

What it does

Shows the date, with a rotating dive bezel and a helium escape valve for saturation diving. Rated far deeper than a Submariner.

Owning it

Servicing: service about every 10 years; a service costs approximately $770 (approx., 2026).

Water resistance in practice: Built for serious diving, including saturation diving depths.

Straps: 20 mm lug width. The standard bracelet is an Oyster or Jubilee; the same 20 mm lugs also take fitted rubber straps or a NATO strap for casual wear.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check the seconds hand first: a modern Rolex glides at 8 beats a second, it never ticks once a second. The date Cyclops must magnify 2.5x so the numeral fills the lens. On modern models the rehaut (inner ring) is engraved 'ROLEX ROLEX ROLEX' with the serial at 6 o'clock, and a tiny coronet is laser-etched in the crystal at 6 o'clock, visible only at an angle. Dial printing should be crisp and slightly raised, the crown should wind smooth and firm, and the watch should feel heavy with a solid, quiet bracelet. The caseback is plain solid metal on most Rolexes. If any check fails, or the price looks too good, have the watch inspected in person by a trusted expert. On a Sea-Dweller: there is no Cyclops over the date — a magnifier on a Sea-Dweller is a fake. Check the helium escape valve on the case side and the thicker case.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/rolex-sea-dweller-16660-matte-mk1/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Rolex Sea-Dweller 16660 Matte Mark 1 16660 Matte MK1 card by WatchProfiles"></iframe>

Frequently asked questions

When was the Rolex reference 16660 Matte MK1 produced?

The Rolex Sea-Dweller 16660 Matte Mark 1 (reference 16660 Matte MK1) was produced 1980–1988, according to the reference source listed at the foot of this page.

Which movement powers the Rolex 16660 Matte MK1?

It is powered by the Rolex caliber 3035.

What size is the Rolex 16660 Matte MK1?

The case measures 40 mm in diameter and is made of stainless steel.

How water-resistant is the Rolex 16660 Matte MK1?

It is water-resistant to 1220 metres, per the manufacturer's specification as recorded by our source. In practice: Built for serious diving, including saturation diving depths.

How much does the Rolex 16660 Matte MK1 cost?

As an approximate 2026 guide: pre-owned Approximately $10K–$16K (approx., 2026). Prices vary by condition, box and papers, and seller — these are guides, not live prices.

Is the Rolex 16660 Matte MK1 still in production?

Discontinued 1988. It was discontinued in 1988.

How often does the Rolex 16660 Matte MK1 need servicing, and what does it cost?

Service about every 10 years; approximately $770 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source