Omega · Aqua Terra
Omega Seamaster Aqua Terra 150m Master Co-Axial 41.5 Stainless Steel / Yellow Gold / Champagne / Bracelet Ref. 231.20.42.21.08.001 (aka: 23120422108001)
The Omega Aqua Terra reference 231.20.42.21.08.001 (aka: 23120422108001) dates from 2014 and is powered by the Omega caliber 8500 water-resistant to 150 metres.
Omega · Aqua Terra
231.20.42.21.08.001 (aka: 23120422108001)
No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.
Specifications
| Reference | 231.20.42.21.08.001 (aka: 23120422108001) |
|---|---|
| Caliber | 8500 |
| Production | from 2014 |
| Case diameter | 41.5 mm |
| Crystal | Sapphire |
| Water resistance | 150 m |
| Dial | Champagne |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Is this watch right for you?
At 41.5 mm this is a modern mid-size case that suits medium wrists; a sporty everyday watch, worn every day, dressy or casual.
History of the model
Released in 2002, the Aqua Terra is the dressier Seamaster: no rotating dive bezel, a teak-pattern dial inspired by yacht decks, and 150 m water resistance — an everyday watch that can swim.
What it does
An automatic watch that tells the time; it winds itself as you wear it, using Omega's Co-Axial escapement.
Owning it
Servicing: service about every 5 years; a service costs approximately $600–$750 (approx., 2026).
Water resistance in practice: Suitable for swimming and snorkelling; not for scuba diving.
Straps: Steel bracelet standard; 20 mm lug width also takes leather or rubber straps.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
How to spot a fake
Check these before buying: (1) an Aqua Terra never has a helium escape valve — one fitted means a fake; (2) the applied Omega logo and indices should be raised metal, not flat print; (3) under a loupe, genuine Omega dial printing is sharp and even — fakes blur, thicken letters and drift off the baseline; (4) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (5) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.
Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.
Where to find one
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches
Omega Seamaster Aqua Terra 150M Co-Axial 42.2 Stainless Steel / Black
Ref. 2802.50.37
Omega Seamaster Aqua Terra 150M Co-Axial 36.2 Yellow Gold / Diamond / MOP / Bracelet
Ref. 2005.75.00
Omega Seamaster Aqua Terra 150M Co-Axial 42.2 Stainless Steel / White / Bracelet
Ref. 2502.33.00
Omega Seamaster Aqua Terra 150M Co-Axial 30 Stainless Steel / Silver / Bracelet
Ref. 231.10.30.20.02.001 (aka: 23110302002001)
Omega Seamaster Aqua Terra 150M Master Co-Axial Stainless Steel / Red Gold / MOP / Bracelet
Ref. 231.20.34.20.55.001 (aka: 23120342055001)
Omega Seamaster Aqua Terra 150M Master Co-Axial 34 Stainless Steel / Sedna Gold / Diamond / MOP
Ref. 231.25.34.20.55.005 (aka: 23125342055005)
From the Aqua Terra family
The verified photographs below show other references in the Omega Aqua Terra family. This profile's own reference, 231.20.42.21.08.001 (aka: 23120422108001), is shown in specification form above.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.
Frequently asked questions
When was the Omega reference 231.20.42.21.08.001 (aka: 23120422108001) produced?
The Omega Seamaster Aqua Terra 150m Master Co-Axial 41.5 Stainless Steel / Yellow Gold / Champagne / Bracelet (reference 231.20.42.21.08.001 (aka: 23120422108001)) was produced from 2014, according to the reference source listed at the foot of this page.
Which movement powers the Omega 231.20.42.21.08.001 (aka: 23120422108001)?
It is powered by the Omega caliber 8500.
What size is the Omega 231.20.42.21.08.001 (aka: 23120422108001)?
The case measures 41.5 mm in diameter.
How water-resistant is the Omega 231.20.42.21.08.001 (aka: 23120422108001)?
It is water-resistant to 150 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for swimming and snorkelling; not for scuba diving.
How often does the Omega 231.20.42.21.08.001 (aka: 23120422108001) need servicing, and what does it cost?
Service about every 5 years; approximately $600–$750 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/omega/aqua-terra/231-20-42-21-08-001 — Produced: 2014 · Movement: Omega caliber 8500 · Diameter: 41.50 mm · Water resistance: 150.00 m · Dial: Champagne
- https://thewatches.ca/blog/omega-watch-series-guide — Fit guidance (2026 value-add)
- https://www.watchscanning.com/journal/anatomy-of-a-fake-omega-seamaster/ — Authenticity guidance (2026 value-add)
- https://www.watchscanning.com/guides/omega-service-cost/ — Servicing guidance (2026 value-add) — Time-only automatic models. Omega recommends a complete service every 5-8 years. Price is Omega's official complete-service range for this movement type in 2026; an official service carries a 2-year warranty.
- https://www.omegawatches.com/en-us/precision-at-every-level/diver-300m — Model history (2026 value-add)
- https://www.watchgecko.com/collections/watch-straps-omega — Strap options (2026 value-add)
- https://thewatches.ca/blog/omega-watch-series-guide — Complications (2026 value-add)