Omega · Aqua Terra

Omega Seamaster Aqua Terra 150M Co-Axial 42.2 Stainless Steel / White / Bracelet Ref. 2502.33.00

The Omega Aqua Terra reference 2502.33.00 dates from 2003 and is powered by the Omega caliber 2500 in a 42.2 mm stainless steel case water-resistant to 150 metres.

Omega · Aqua Terra

2502.33.00

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference2502.33.00
Caliber2500
Productionfrom 2003
Case materialStainless Steel
Case diameter42.2 mm
CrystalSapphire
Water resistance150 m
DialWhite

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 42.2 mm this is a modern sport size case that suits medium to large wrists; a sporty everyday watch, worn every day, dressy or casual.

History of the model

Released in 2002, the Aqua Terra is the dressier Seamaster: no rotating dive bezel, a teak-pattern dial inspired by yacht decks, and 150 m water resistance — an everyday watch that can swim.

What it does

An automatic watch that tells the time; it winds itself as you wear it, using Omega's Co-Axial escapement.

Owning it

Servicing: service about every 5 years; a service costs approximately $600–$750 (approx., 2026).

Water resistance in practice: Suitable for swimming and snorkelling; not for scuba diving.

Straps: Steel bracelet standard; 20 mm lug width also takes leather or rubber straps.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) an Aqua Terra never has a helium escape valve — one fitted means a fake; (2) the applied Omega logo and indices should be raised metal, not flat print; (3) under a loupe, genuine Omega dial printing is sharp and even — fakes blur, thicken letters and drift off the baseline; (4) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (5) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-aqua-terra-2502-33-00/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Aqua Terra 150M Co-Axial 42.2 Stainless Steel / White / Bracelet 2502.33.00 card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 2502.33.00 produced?

The Omega Seamaster Aqua Terra 150M Co-Axial 42.2 Stainless Steel / White / Bracelet (reference 2502.33.00) was produced from 2003, according to the reference source listed at the foot of this page.

Which movement powers the Omega 2502.33.00?

It is powered by the Omega caliber 2500.

What size is the Omega 2502.33.00?

The case measures 42.2 mm in diameter and is made of stainless steel.

How water-resistant is the Omega 2502.33.00?

It is water-resistant to 150 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for swimming and snorkelling; not for scuba diving.

How often does the Omega 2502.33.00 need servicing, and what does it cost?

Service about every 5 years; approximately $600–$750 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source