Zenith · Elite
Zenith Elite Moon Phase 40 Stainless Steel / Grey Ref. 03.3100.692/03.C923
The Zenith Elite reference 03.3100.692/03.C923 was produced 2020–2024 and is powered by the Zenith caliber Elite 692 in a 40.5 mm stainless steel case water-resistant to 50 metres.
Zenith · Elite
03.3100.692/03.C923
No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.
Specifications
| Reference | 03.3100.692/03.C923 |
|---|---|
| Caliber | Elite 692 |
| Production | 2020–2024 |
| Status | Discontinued 2024 |
| Case material | Stainless Steel |
| Case diameter | 40.5 mm |
| Crystal | Sapphire |
| Water resistance | 50 m |
| Dial | Grey · Guilloche |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Is this watch right for you?
At 40.5 mm across, this is a large, slim dress watch; it suits medium to larger wrists and wears with real presence.
What it does
Tells the time, and also has a moonphase showing the age of the moon.
Owning it
Servicing: service about every 6 years; a service costs approximately $900–$1.3K (approx., 2026).
Water resistance in practice: Suitable for showering and brief immersion; not for swimming.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
Where to find one
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches
Zenith Elite Tourbillon
Ref. 03.2190.4041/01.C498
Zenith Elite Moon Phase 36 Stainless Steel / Silver
Ref. 16.3200.692/01.C832

Zenith Elite Classic 40 Rose Gold / Silver
Ref. 18.3100.670/01.C920
Zenith Pilot Type 20
Ref. 03.1930.681/21.C723
Zenith El Primero Chronomaster 42 Stainless Steel / Anthracite / Rubber
Ref. 03.2040.400/26.R576
Zenith El Primero Chronomaster 42 Stainless Steel / Silver / Alligator
Ref. 03.2040.400/69.C777
From the Elite family
The verified photographs below show other references in the Zenith Elite family — pictured: reference 18.3100.670/01.C920, reference 18.3100.670/01.C920. This profile's own reference, 03.3100.692/03.C923, is shown in specification form above.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.
Frequently asked questions
When was the Zenith reference 03.3100.692/03.C923 produced?
The Zenith Elite Moon Phase 40 Stainless Steel / Grey (reference 03.3100.692/03.C923) was produced 2020–2024, according to the reference source listed at the foot of this page.
Which movement powers the Zenith 03.3100.692/03.C923?
It is powered by the Zenith caliber Elite 692.
What size is the Zenith 03.3100.692/03.C923?
The case measures 40.5 mm in diameter and is made of stainless steel.
How water-resistant is the Zenith 03.3100.692/03.C923?
It is water-resistant to 50 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for showering and brief immersion; not for swimming.
Is the Zenith 03.3100.692/03.C923 still in production?
Discontinued 2024. It was discontinued in 2024.
How often does the Zenith 03.3100.692/03.C923 need servicing, and what does it cost?
Service about every 6 years; approximately $900–$1.3K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/zenith/elite/03-3100-692-03-c923 — Produced: 2020 - 2024 · Movement: Zenith caliber Elite 692 · Case material: Stainless Steel · Diameter: 40.50 mm · Water resistance: 50.00 m · Dial: Grey
- https://watchbase.com/zenith/elite/03-3100-692-03-c923 — Fit guidance (2026 value-add)
- https://www.watcheq.com/watch.cfm?watch=43668 — Servicing guidance (2026 value-add)
- https://watchbase.com/zenith/elite/03-3100-692-03-c923 — Complications (2026 value-add)