Zenith · Elite
Zenith Elite Moon Phase 36 Stainless Steel / Silver Ref. 16.3200.692/01.C832
The Zenith Elite reference 16.3200.692/01.C832 was produced 2020–2024 and is powered by the Zenith caliber Elite 692 in a 36 mm stainless steel case water-resistant to 50 metres.
Zenith · Elite
16.3200.692/01.C832
No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.
Specifications
| Reference | 16.3200.692/01.C832 |
|---|---|
| Caliber | Elite 692 |
| Production | 2020–2024 |
| Status | Discontinued 2024 |
| Case material | Stainless Steel |
| Case diameter | 36 mm |
| Bezel | Gem-Set |
| Crystal | Sapphire |
| Water resistance | 50 m |
| Dial | Grey · Guilloche |
Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.
Is this watch right for you?
At 36 mm across, this is a mid-size, slim dress watch; it suits most wrists and wears slim and elegant.
What it does
Tells the time, and also has a moonphase showing the age of the moon.
Owning it
Servicing: service about every 6 years; a service costs approximately $900–$1.3K (approx., 2026).
Water resistance in practice: Suitable for showering and brief immersion; not for swimming.
Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.
Where to find one
Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.
Similar watches
Zenith Elite Tourbillon
Ref. 03.2190.4041/01.C498
Zenith Elite Moon Phase 40 Stainless Steel / Grey
Ref. 03.3100.692/03.C923

Zenith Elite Classic 40 Rose Gold / Silver
Ref. 18.3100.670/01.C920
Zenith El Primero Chronomaster 38 Stainless Steel / Slate / Alligator
Ref. 03.2150.400/26.C714
Zenith El Primero 146 Stainless Steel / Blue
Ref. 03.2150.4069/51.C805
Zenith El Primero Chronomaster 38 Rose Gold / Silver / Alligator
Ref. 18.2150.400/69.C713
From the Elite family
The verified photographs below show other references in the Zenith Elite family — pictured: reference 18.3100.670/01.C920, reference 18.3100.670/01.C920. This profile's own reference, 16.3200.692/01.C832, is shown in specification form above.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.

Photo: EMore98 via Wikimedia Commons, CC BY-SA 4.0. Cropped and resized for display.
Frequently asked questions
When was the Zenith reference 16.3200.692/01.C832 produced?
The Zenith Elite Moon Phase 36 Stainless Steel / Silver (reference 16.3200.692/01.C832) was produced 2020–2024, according to the reference source listed at the foot of this page.
Which movement powers the Zenith 16.3200.692/01.C832?
It is powered by the Zenith caliber Elite 692.
What size is the Zenith 16.3200.692/01.C832?
The case measures 36 mm in diameter and is made of stainless steel.
How water-resistant is the Zenith 16.3200.692/01.C832?
It is water-resistant to 50 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for showering and brief immersion; not for swimming.
Is the Zenith 16.3200.692/01.C832 still in production?
Discontinued 2024. It was discontinued in 2024.
How often does the Zenith 16.3200.692/01.C832 need servicing, and what does it cost?
Service about every 6 years; approximately $900–$1.3K per service (approx., 2026). The brand or an authorised service centre gives the exact figure.
Source
- https://watchbase.com/zenith/elite/16-3200-692-01-c832 — Produced: 2020 - 2024 · Movement: Zenith caliber Elite 692 · Case material: Stainless Steel · Diameter: 36.00 mm · Water resistance: 50.00 m · Dial: Grey
- https://watchbase.com/zenith/elite/16-3200-692-01-c832 — Fit guidance (2026 value-add)
- https://www.watcheq.com/watch.cfm?watch=43668 — Servicing guidance (2026 value-add)
- https://watchbase.com/zenith/elite/16-3200-692-01-c832 — Complications (2026 value-add)