Omega · Aqua Terra

Omega Seamaster Aqua Terra 150M Co-Axial 38.5 Stainless Steel / Red Gold / Black Ref. 231.23.39.21.51.001

The Omega Aqua Terra reference 231.23.39.21.51.001 dates from 2016 and is powered by the Omega caliber 8500 water-resistant to 150 metres.

Omega · Aqua Terra

231.23.39.21.51.001

No freely licensed photograph of this exact reference is available yet — rather than illustrate it with a different watch, this profile leads with its verified specifications.

Specifications

Reference231.23.39.21.51.001
Caliber8500
Productionfrom 2016
Case diameter38.5 mm
CrystalSapphire
Water resistance150 m
DialBlack

Every specification above is taken from the source listed below; anything the source does not state is left blank rather than guessed.

Is this watch right for you?

At 38.5 mm this is a classic mid-size case that suits most wrists; a sporty everyday watch, worn every day, dressy or casual.

History of the model

Released in 2002, the Aqua Terra is the dressier Seamaster: no rotating dive bezel, a teak-pattern dial inspired by yacht decks, and 150 m water resistance — an everyday watch that can swim.

What it does

An automatic watch that tells the time; it winds itself as you wear it, using Omega's Co-Axial escapement.

Owning it

Servicing: service about every 5 years; a service costs approximately $600–$750 (approx., 2026).

Water resistance in practice: Suitable for swimming and snorkelling; not for scuba diving.

Straps: Steel bracelet standard; 19 mm lug width also takes leather or rubber straps.

Servicing figures are approximate guides; the brand or an authorised service centre gives the exact figure.

How to spot a fake

Check these before buying: (1) an Aqua Terra never has a helium escape valve — one fitted means a fake; (2) the applied Omega logo and indices should be raised metal, not flat print; (3) under a loupe, genuine Omega dial printing is sharp and even — fakes blur, thicken letters and drift off the baseline; (4) on a display-back model, a genuine Co-Axial movement shows arabesque Cotes de Geneve — clones use a decorated Miyota or Seagull; (5) the caseback engraving and laser-etched serial should be sharp and deep. When in doubt, have a certified watchmaker inspect it in person.

Use these checks as a starting point only — a convincing fake can pass them. For a purchase, have the watch authenticated by the brand or an authorised dealer.

Where to find one

Links go to the brand and to established pre-owned marketplaces; WatchProfiles takes no commission on any purchase.

Similar watches

Embed this profile

Publishers and forums may embed this watch card for free, with the credit link intact:

<iframe src="https://watchprofiles.com/embed/omega-aqua-terra-231-23-39-21-51-001/" width="340" height="430" style="border:0;border-radius:14px;overflow:hidden" loading="lazy" title="Omega Seamaster Aqua Terra 150M Co-Axial 38.5 Stainless Steel / Red Gold / Black 231.23.39.21.51.001 card by WatchProfiles"></iframe>

Frequently asked questions

When was the Omega reference 231.23.39.21.51.001 produced?

The Omega Seamaster Aqua Terra 150M Co-Axial 38.5 Stainless Steel / Red Gold / Black (reference 231.23.39.21.51.001) was produced from 2016, according to the reference source listed at the foot of this page.

Which movement powers the Omega 231.23.39.21.51.001?

It is powered by the Omega caliber 8500.

What size is the Omega 231.23.39.21.51.001?

The case measures 38.5 mm in diameter.

How water-resistant is the Omega 231.23.39.21.51.001?

It is water-resistant to 150 metres, per the manufacturer's specification as recorded by our source. In practice: Suitable for swimming and snorkelling; not for scuba diving.

How often does the Omega 231.23.39.21.51.001 need servicing, and what does it cost?

Service about every 5 years; approximately $600–$750 per service (approx., 2026). The brand or an authorised service centre gives the exact figure.

Source